Polk Audio PA330.2 2 Channel Amplifier

Polk Audio

$299.00


Power and Style that Amplifies

The PA 330.2 is a two-channel class A/B amplifier with built-in fully variable high-pass and low-pass crossover capable of producing 75 Watts x 2 RMS continuous power @ 4 ohm. It's also capable of bridged one-channel operation with a maximum power of 300 Watts into 4 ohms.

PA330.2 Features

・Speaker level input connects 2 ohm stable stereo operation is capable of driving virtually all automotive speakers.
・High-speed MOSFET switching power supply and high current bipolar output transistors pump maximum voltage and high current to your speakers or subwoofers.
・Double layer fiberglass epoxy printed circuit boards for more rigidity, less shrinkage and a smaller overall amp footprint.
・6-way Smart System Protection (SSP) circuits
・Selectable 12 dB/octave high or low-pass crossover with fixed crossover frequency.
・Switchable 3-position bass boost (0dB, 6dB, 12dB) for extra bass thump.
・Variable input gain optimizes match with different signal sources (175mv to 8V).
・RCA outputs for easy daisy chaining of other amplifiers.
・Mounting hardware with rubber isolation grommets and extra fuse included.
・Multi-color status LED gives instant information on amplifier operation.

Amplifier Power Specs

    Dynamic Power at 14.4V
        Watts per channel bridged - 4 ohms: 300 watts
        Watts per channel NOT bridged @ 1 kHz - 2 ohms: 200 watts
        Watts per channel NOT bridged @ 1 kHz - 4 ohms: 150 watts
    RMS Power at 14.4V
        Watts per channel bridged - 4 ohms: 200 watts
        Watts per channel NOT bridged @ 1 kHz - 2 ohms: 100 watts
        Watts per channel NOT bridged @ 1 kHz - 4 ohms: 75 watts

Amplifier Specs

12V & Ground Cable Gauge: 4AWG
Bass Boost Characteristics: 3-position(0,6,12dB) Hz
Channel Notes: Bridgeable Class AB MOSFET
Channels: 2
Total Dynamic Power: 300 watts

Dimensions

Depth: 8 1/8" (20.64cm)
Height: 1 15/16" (4.92cm)
Width: 7 3/4" (19.68cm)

Electrical

CEA2006 Rating: 200 watts / 4 ohms
Effective Damping Factor: >100
Input Impedance: 15 k ohms
Max Sensitivity: 175mV - 8 dB
Minimum Impedance Bridged: 4 ohms
Minimum Impedance Not Bridged: 2 ohms
Protection Circuitry: 25 Amp ATC fuse, reverse polarity, thermal and DC offset
Remote Gain: No
Signal-to-noise (Referenced to rated power): 80 dBA
Total Frequency Response: 10Hz-30kHz
High Pass Filter - Filter Slope: 12dB/oct
Low Pass Filter - Filter Slope: 12dB/oct


More from this collection